It looks like no-one has yet taken advantage of the CC-BY-NC-SA licence under which Adam Savage kindly licenced his plans for the EDC One and EDC Two bags. I’m not planning on making one of the bags anytime soon, but I did want to take a look at the plans. Since I couldn’t find a free download anywhere, I decided to buy the plans and share them here:
If you do download a free copy to take a look, and then decide to make a bag, please consider buying the plans as well. It’s only $5 US, after all. And if you make something, don’t forget to share what you’ve made with the world!
Do you have any idea of the sizes on the EDC TWO?
Good question. There doesn’t seem to much in the way of dimensions in the drawings. I think you’re just meant to print the drawings at 100% size and go from there. I just now imported the EDC2 pdf into Gimp, and used the measuring tool on one of the 3/8″ seam allowances, and that does match to 9,5mm, so printing at 100% should work. While at it, I measured the main body piece, and that’s about 740mm x 480mm. I hope this helps.
Thank you so much 👌🏻
Does anyone know where one could find a download of the pouch pattern from Savage Industries? It’s licensed under the same CC-BY-NC-SA license, but I haven’t been able to find it anywhere other than the shop. I will probably end up purchasing it, but just wanted to look at in online first.